Heat resistant varnishes for each radiator

Special radiator coating must withstand high temperatures. You must be flexible so that they can expand in heat, otherwise the paint burst quickly.

  1. 1
  2. 2
Sikkens Redox AK Primer anticorrosive primer
Item no.: 3-1520000
32,78 €/Ltr.32,78€*
Brillux Aluminum Bronze 283 silver
Item no.: 02830500000x
48,20 €/Ltr.24,10€*
Brillux Radiator Paint 990
Item no.: 099007500000
29,13 €/Ltr.21,85€*
Brillux Metal Primer 850
Item no.: 085007500000
35,31 €/Ltr.13,24€*
Brillux Top Paint Stripper 155
Item no.: 015502,500000
24,61 €/Ltr.61,52€*
Brillux Lacryl-PU Radiator Paint 265
Item no.: 026507500000
34,44 €/Ltr.25,83€*
  1. 1
  2. 2

Do you want to paint your heating? Here you can find the right products.

If present, they should first remove rusty and loose old paints.

To better remove old varnish and dispersion paints, The top Abbeizer 155 from Brillux. This can be applied with the roller or brush with the brush, in the case of a thicker layer which is to be worn off, it should apply the stripping agent after approx. 2-3 hours renewed. The top stripper is biodegradable If this is not the case, it is sufficient to grind the entire surface of the radiator with the abrasive paper.

If there is no paint on the radiator, you should primer the radiator beforehand, but you can use the base 850, which is available for indoor and outdoor areas and is heat-resistant up to 180 ° C.

After 3 hours they can rework it. It is important, however, before applying the varnish to grind the primer again so that the lacquer adheres well later.

If the primer is sanded and dried it can apply the varnish.

The varnish can best be applied with a radiator brush so that it can be painted on all the heating surfaces.

The Radiator Paint 990 of Brillux, based on solvent, is e.g. A matching lacquer to paint your heater. It has a drying time of 3 hours.

This is suitable for hard-wearing paints on radiators as well as pipes of hot water and steam heaters and is heat-resistant up to + 180 ° C.

The radiator lacquer 265 from Brillux is also heat-resistant up to + 180 ° C, but this is water-based, therefore somewhat smoother. It has a drying time of ½ hours and after 1 hour one can already overhaul this. If you have any further questions, please do not hesitate to contact us.

Your advantages on farbe-und-technik.de:
  • Competent interior design consultant
  • Secure shopping with SSL
  • fast delivery
  • Free shipping within Germany